Betonfix KIMIFER
Cement mortar for steel reinforcement rebars protection used in the reinforced concrete repairing treatment
Betonfix KIMIFER is a single-component re-alkalizing, anti-corrosive hydraulic mortar for steel reinforcing bars protection. It is composed of a synergic system of corrosion inhibitors for high protection against the steel corrosion. its non-toxic (chrome-free). its strongly adhesive to concrete and iron surfaces, has high alkaline properties and excellent resistance to water and harmful gases in the atmosphere
Applications
Betonfix KIMIFER is used as an anti-corrosive protection for exposed reinforcing bars to restore deteriorated reinforced concrete structures together with non-shrink Betonfix mortars.
Certifications
Betonfix is CE marked according to the requirements of EN 1504-7 for protection against corrosion of reinforcement.
Application
Betonfix KIMIFER is ready-to-use on the addition of drinking water, in the quantity shown in the table. Exposed metal reinforcements rebars have to be properly cleaned (until obtaining the “white metal” condition), removing adequate portions of concrete. Mix Betonfix KIMIFER with potable water until you get a dense but brushable consistency, apply by brush on steel reinforcement bars. Start the renovation process using Betonfix mortars.
Application Areas
Gli interventi dove Betonfix KIMIFER può essere utilizzato.
Cortical restoration of reinforced concrete elements
Restoration of reinforced concrete elements even in high thicknesses with thixotropic mortars
Restoration of reinforced concrete elements even in high thicknesses with pourable mortars
Reinforcement of reinforced concrete elements by casing with mortars and concretes
Reinforcement of reinforced concrete elements by means of jacketing with fibre-reinforced concrete
Extradosal reinforcement of floors by casting concrete with mesh
Related Products
A range of products to use together with {name}. The use of one or more products varies depending on the type of work to be done.
Soluzione RUGGINE
One component ready-to-use filming varnish for phosphating treatment of reinforcement rods
Tecnoseal ACR
One-component acrylic sealant for vertical expansion joints. Applicable on damp substrates....
Tecnoseal 88
Self-leveling two-component polyurethane sealant used for expansion joints
Tecnoseal 130
Paintable single-component polyurethane sealant for expansion joints and sealing on metal laminates
Solvente POLY
Solvente POLY is a solvent suitable for the dilution of polyurethane products and for the...
Solvente EPOX
Solvent suitable for the dilution of epoxy products and the cleaning of tools before the resins...
Kimitech EP-RG
Synthetic resin to be used pure or added to cement or lime mortars
Kimitech ELASTOFIX
Synthetic resin used in combination with waterproofing mortars or tile adhesives
Kimitech BC
Polymeric resin to be used in place of water, mixing mortars from Basic, Betonfix, Limepor or...
Kimitech B2
Synthetic resin to improve chemical and mechanical characteristics, reducing elastic module, of...
Kimitech ANTITARLO
Anti-woodworm impregnating agent to preserve and protect the wood
Kimitech AD
Additive to improve the expansive properties and extend workability time
Kimitech ACR
One-component acrylic resin to favour the adhesion in painting cycles with acrylic resins or...
Kimifill
Sands, powders and pre-mixed dry-mix for epoxy mortars, nonskid treatments, epoxy leveling, etc
Ethafoam
Closed cell profile used to pre-fill joints or cracks to be sealed
Antievaporante W
Film-forming curing agent for concrete castings
Kimitech WALLMESH HR-HD
Preformed A.R. glass fibre structural mesh
Kimitech WALLMESH HR
Rete in fibra di vetro A.R. preformata con appretto termoindurente
Kimitech WALLMESH MR-HD
Preformed H.R. glass fibre structural mesh
Kimitech WALLMESH MR
Rete in fibra di vetro A.R. preformata con appretto termoindurente
Kimitech WALLMESH CRM 99x99
Rete strutturale rigida in fibra di vetro preformata
Kimitech WALLMESH CRM 66x66
Rete strutturale rigida in fibra di vetro preformata
Kimitech WALLMESH CRM 33x33
Rete strutturale rigida in fibra di vetro preformata
Kimitech WALLMESH CORNER HD
Rete strutturale in fibra di vetro A.R. preformata
Kimitech CORNER CRM 33x33, 66x66, 99x99
Angolare preformato in fibra di vetro
Kimitech VR 300
Tessuti in fibra di vetro specifici per interventi strutturali
Kimitech TONDO VR
Glass fibre reinforcing bars
Kimitech TONDO CB
Carbon reinforcing bars
Kimitech TNT
Non-woven fabric to reinforce waterproofing and protective liquid resins of Kimitech and...
Kimitech S100
Fiberglass mat to reinforce waterproofing and protective liquid resins of Kimitech and Kimicover...
Kimitech PLUG VR/HD
Preformed "L" shaped connector with improved grip
Kimitech PLUG VR
Connettore preformato a “L” ad aderenza migliorata
Kimitech PLUG CRM
Connettore preformato a “L” in fibra di vetro
Kimitech PLATE HM
Lamina pultrusa in fibra di carbonio ad alto modulo per realizzare interventi FRP
Kimitech PLATE
Pultruded carbon fibre plate for FRP interventions
Kimitech FIOCCO VR
Glass fibre connector for anchoring
Kimitech FIOCCO CB
Carbon fibre connector for anchoring
Kimitech CBA 620
"Range of carbon fibre reinforcement fabrics with different weights and textures for structural...
Kimitech CBA 420
"Range of carbon fibre reinforcement fabrics with different weights and textures for structural...
Kimitech CBA 320
"Range of carbon fibre reinforcement fabrics with different weights and textures for structural...
Kimitech CB 380 MTX
Tessuti di armatura in fibra di carbonio per rinforzi FRP
Kimitech CB ST 300
Range of carbon fibre reinforcement fabrics with different weights and textures for structural...
Kimitech CB 820
Range of carbon fibre reinforcement fabrics with different weights and textures for structural...
Kimitech CB 620
Range of carbon fibre reinforcement fabrics with different weights and textures for structural...
Kimitech CB 420
Range of carbon fibre reinforcement fabrics with different weights and textures for structural...
Kimitech CB 320
Range of carbon fibre reinforcement fabrics with different weights and textures for structural...
Kimitech BS ST 400
Basalt fiber reinforcement fabrics for FRCM reinforcements
Kimitech BS ST 200
Basalt fiber reinforcement fabrics for FRCM reinforcements
Kimitech ASF
Connection system for anti-collapsing intervention on hollow-bricks in RC slabs
Kimitech 550 PLUS
Glass-fibres reinforcing mesh with alkaline-resistant treatment
Kimitech 350
160 g/m2 glass fiber reinforcement mesh with anti-alkaline primer for reinforcement
Kimitech 120
Pre-primed, alkali-resistant polypropylene reinforcing fabric for waterproofing and protective...
Kimisteel INOX X-T
Connettore in acciaio inox AISI 304 per il collegamento a T tra le barre elicoidali Kimisteel...
Kimisteel INOX X-CAP
Sistema di fissaggio per ancoraggio di barre elicoidali Kimisteel INOX X-BAR
Kimisteel INOX X-BAR
Helical inox steel bars for structural reinforcement
Kimisteel INOX 800
Stainless steel unidirectional reinforcing fabric with high resistance, used in structural...
Kimisteel IC TASSELLO
Polypropylene anchor for thread connection systems made with Kimisteel steel fabrics.
Kimisteel GLV 650
High strength galvanized steel fabric to be used as reinforcement fabric in structural...
Soluzione P
Buffered acid-base chemical formulation for cleaning brick facades and industrial flooring
Kimistone KSF
Strong consolidant based on ethyl silicate for silicate stone materials
Kimistone K55
Consolidant and protective product made out of silicic acid ethyl esters and silane-siloxan...
Kimistone K10
Consolidant and protective product made out of acryl-siloxane copolymers in solvent-based solution
Kimistone IDROREP
High-penetration water repellent siloxane protector, highly breathable, neutral and reversible
Kimistone IBASIL
Water-based, water-repellent polysiloxane product. It is highly breathable, neutral and reversible
Kimistone GRAFIX MOOVE S
Cleaner of paint and graffiti on stone, metal and glass surfaces
Kimistone DEFENDER
Neutral water-based, reversible, vapour-permable, anti-graffiti sacrificial protective product
Kimistone C 957
Ammonium-carbonate-based cleaner for delicate stone surfaces.
Kimistone C10.10
Strong alkaline cleaner for compact, carbonate stones
Kimistone BIOCIDA
Biocida per l'eliminazione della microflora e delle muffe
Kimistone ANTISMOG
Protettivo idro-oleorepellente in miscela acquosa per pietre e manufatti lapidei
Aderflex RP
Adesivo cementizio rapido per piastrelle ceramiche
Aderflex KR
Adesivo cementizio ad alte prestazioni e deformabilità per piastrelle ceramiche
Aderflex DK
Adesivo cementizio ad alte prestazioni per piastrelle ceramiche
Aderflex
High-performance cementious adhesive for ceramic tiles
Idromix
Power additive to be mixed with dry cement and aggregates for casting foundations
Fluimax 2HS
Liquid additive to be added into the cement mixer to get super-plasticizer concretes with high...
Kimitech K60
Single-component acrylic-based resin used for anti-dust treatments on concrete, bricks and stones
Kimitech K40 NF
Two-component colored epoxy resin, solvent-free, for protective painting of reinforced concrete...
Kimitech K40 AP GIALLO
Solvent-free yellow bicomponent epoxy resin, for protective painting of r.c. works, resin floors...
Kimitech K40 AP BIANCO
Solvent-free white bicomponent epoxy resin, for protective painting of r.c. works, resin floors...
Kimitech HLA
Colored self-leveling two-component epoxy resin to create continuous, hygienic and easily...
Kimitech ECA
Self-leveling three-component epoxy-cement system for resin floors and coatings
Kimitech ECF
Three-component thixotropic epoxy-cement system for resin-flooring and caoting
Kimitech EC
Bi-component epoxy resin to be mixed with especially designed Kimifill products
Kimifloor VETRO
Two-component, fluid, transparent epoxy resin for thick vitrification and incorporation of objects
Kimifloor ECO FINITURA PLUS
Bi-component water-based poliurethane resin, transparent, with excellent hardness
Kimifloor ECO FINITURA
One-component, water-based polyurethane resin, transparent, used for finishing resin floors and...
Kimifloor ECO BASE
A mixture of polymers in aqueous emulsion to be used, even when properly loaded, as a base for...
Kimicover UNO
Single-component elastic cement mortar for waterproofing
Kimicover K80
Low viscosity polymeric latex, with biocidal action, for encapsulations
Kimicover JOINT e JOINT P
Self-adhesive elastic membrane, width 8 cm for preliminary treatment of expansion joints and...
Kimicover IN
Single-component resin for chemical barriers on walls subject to rising damp
Kimicover GUAINA
Resin loaded with dry-mix of cement-based binders and used to waterproof balconies and terraces
Kimicover FIX MV
Bicomponent medium-viscosity epoxy resin used for the preparation of substrates before...
Kimicover FIX
Bicomponent epoxy water-based resin
Kimicover DUO
Two-component elastic waterproofing cementitious mortar for balconies and terraces and for...
Kimicover BLINDO
Single-component elastic acrylic resin for protective treatment of reinforced concrete buildings,...
Kimicover 701P
Single component water-based polyurethane liquid membrane for the waterproofing of balconies,...
Kimicover 601P
Single-component polyurethane waterproofing resin for balcony, tarraces and covering structures
Kimicover 501
High-performance monocomponent acrylic resin for waterproofing balconies, terraces and...
Kimicover 301 NF
Two-component aliphatic polyurethane resin for protective treatments of concrete structures,...
Kimitech VINYL CTR
Bi-component vinylester resin in cartridges for anchoring
Kimitech F3
Two-component polyester resin, without styren,e in cartridges for anchorings
Kimitech EP-TX/311
Two-component loaded thixotropic epoxy resin for plates, metal elements or of FRP systems bonding
Kimitech EP-TX
Thixotropic two-component epoxy resin
Kimitech EPOXY CTR
Bi-component epoxy resin cartridges for anchoring injections
Kimitech EP-IS
Two-component, medium viscosity liquid epoxy resin
Kimitech EP-IN/50
Fluid epoxy resin used for impregnation of FRP systems
Kimitech EP-IN
Liquid two-component epoxy adhesive for structural injection, vertical downwards, etc.
Kimitech CMP
Medium viscosity epoxy resin used for impregnation of FRP systems
Limepor TREVI
Malta a base di calce idraulica naturale per impermeabilizzazioni di superfici esterne
Limepor SK
Natural hydraulic lime based mortar for plasters
Limepor RZ
Malta a base di calce idraulica naturale per realizzare rinzaffi desalinizzati prima degli...
Limepor PMP
Natural hydraulic lime-based for plasters and masonry works (break-fill, pointings). Max...
Limepor PLUS
Ready-to-use mortar for internal and external plasters and skimmimng coats
Limepor NHL 5
Calce idraulica naturale da miscelare con inerti per realizzare intonaci ed opere murarie...
Limepor NHL 3.5
Calce idraulica naturale da miscelare con inerti per realizzare intonaci ed opere murarie...
Limepor MT
Malta a base di calce idraulica naturale per realizzare intonaci ed opere murarie (scuci-cuci,...
Limepor MONO
Malta a base di calce idraulica naturale per realizzare intonaci deumidificanti macroporosi
Limepor LGS
Natural Hydraulic Lime based product to be mixed with aggregates in order to obtain mortars for...
Limepor IZ8
Boiacca a base di calce idraulica naturale per iniezioni di consolidamento all'interno di...
Limepor IZ4
Miscela a base di calce idraulica naturale per realizzare incollaggi di intonaci affrescati...
Limepor FN
Malta a base di calce idraulica naturale per rasature di superfici interne ed esterne con...
Limepor EDO
Natural hydraulic lime-based mortar for interior and exterior skimming coats, max granulometry...
Limepor COCCIOFORTE
“Cocciopesto” (aggregates) system for structural consolidation
Limepor 100 GEL
Injection mixture with pseudoplastic consistency (gel)
Limepor 100
Injection mortar containing natural hydraulic lime for the consolidation of rubble-filled walls
Tectoria NHL 3.5
Pura calce idraulica naturale da miscelare con inerti per realizzare intonaci ed opere murarie ...
Tectoria INTONACO NHL
Malta di calce idraulica naturale per realizzare intonaci ed opere murarie (scuci-cuci,...
Tectoria FINITURA
Malta di pura calce idraulica naturale per realizzare rasature di superfici esterne ed interne....
Tectoria AFFRESCO
Miscela di pura calce idraulica naturale per realizzare incollaggi di intonaci affrescati...
Tectoria STRUTTURA
Boiacca di calce idraulica naturale per iniezioni di consolidamento all'interno di murature a...
Tectoria RZ
Malta a base di calce idraulica naturale per realizzare rinzaffi desalinizzati prima...
Tectoria MONO
Malta a base di calce idraulica naturale per realizzare intonaci deumidificanti mono-prodotto
Tectoria M15
NHL based mortar used for masonry, break-fill, anchoring, plasters and reinforcing castings
Tectoria DF
Malta a base di calce idraulica naturale per realizzare intonaci deumidificanti macroporosi da...
Tectoria DEUMIDIFICA
Malta cementizia a ritiro compensato per massetti ad asciugamento medio-rapido
Basic MASSETTO
Shrinkage-compensated cementicious mortar for mediumfast drying screeds
Basic MALTA R3
Normal setting thixotropic cement mortar with low elastic modulus and compensated shrinkage for...
Basic MALTA M15/F
M15 Natural Hydraulic lime based mortar with a maximum particle size of 1.2 mm
Basic MALTA M15
Mortar made out of natural hydraulic lime for masonry class M15
Basic INTONACO
Plaster made out of cement and hydrated lime
Basic INIEZIONE
Injection mix with natural hydraulic lime for the consolidation of rubble-filled walls
Betonfix WW
Ultra-rapid setting cement powder used to infill water seepage even under pressure
Betonfix TX
Thixotropic, fast-setting cement mortar with a low modulus of elasticity.
Betonfix TERMORASA
Cement-based mortar for bonding and skimming coating of certified thermal coats Kimitherm.
Betonfix RS
Cement mortar for finishing of concrete substrates, masonry, plasters. Maximum granulometry 0,5 mm.
Betonfix RR
Thixotropic fibre-reinforced mortar for localised cortical repair of concrete and skimming coats...
Betonfix RCA
Thixotropic, cement-based mortar with low modulus of elasticity for restoration and structural...
Betonfix RA
Cement mortar for self-levelling skim coating of internal screeds ranging from 1 to 10 mm. Fast...
Betonfix R52
Cement-based mortar for skimming coats on concrete and masonry supports, plasters. Maximum...
Betonfix R30
Cement mortar for concrete substrates, masonry and plasters finishing. Maximum granulometry 0,5 mm.
Betonfix PRONTO
Shrinkage-compensating hydraulic mortar for fast drying screeds
Betonfix PL
Injectable mortar with high resistance to sulphates. It is used for microposts and...
Betonfix MONOLITE UR
High resistance ultra rapid setting thixotropic mortar for cortical repair
Betonfix MONOLITE R
Thixotropic high-resistance, rapid-curing mortar, for structural and non-structural repair of...
Betonfix MONOLITE N
Thixotropic high-resistance, normal curing mortar, for structural and non-structural repair of...
Betonfix KIMIFER
Cement mortar for steel reinforcement rebars protection used in the reinforced concrete...
Betonfix HCR EVO TX
High performance, high ductility thixotropic cementitious grout with fibres
Betonfix HCR EVO
High performance and high ductility pourable cementitious grout with fibres
Betonfix FB
Thixotropic anti-shrinkage fibre-reinforced cement mortar. Normal curing, suitable for...
Betonfix DM
Expansive mortar for silent, non-explosive demolitions
Betonfix CR
Pourable cement mortar for structural repair and consolidation works
Betonfix AQM GG
Bicomponent cementicious mortar to be used with Kimitech meshes for concrete skimming coats
Betonfix AL
Anti-shrinkage self-leveling mortar for fastening and precision anchoring
Betonfix 300
Osmotic waterproofing mortar used to waterproof tanks and basements, even in counter-thrust
Betonfix 200
Fluid slurry for anchoring, injections with aggregates. Suitable for high resistance concrete.
Betonfix 200 TH
Anti-shrinkage slurry with pseudoplastic behavior for high strength anchoring and injections
Request Sent
You will receive a confirmation email shortly
