Kimisteel GLV 650

Kimisteel GLV 650 is part of Kimisteel GLV 650 B SYSTEM and Kimisteel GLV 650 M SYSTEM which got the CVT n. 207.

For different kind of works please read technical documents and the TDS of the products to be used. Prepare the surfaces to be reinforced by cleaning thoroughly from any element which may affect the adhesion the reinforcement system and prepare mechanical anchoring systems or drill hole in order to anchor the ends of the fabric itself. On substrates primed, apply one of the following matrices: • Basic MALTA M15/F mortar in case of masonry surface. • Betonfix MONOLITE N in case of concrete surface. After the first layer of matrix, while the matrix is still fresh, insert one end of the fabric in the drilled hole or in the mechanical fastening systems previously prepared, lay the fabric, pre-tensioning (if provided) and secure the other end of the strip and, with metal spatula and / or trowel, drown the fabric into the matrix. While the matrix is still fresh, apply a further coat of matrix making sure the fabric will not remain in any area exposed. The fabric itself can be used to make connecting rods in structural and non-structural reinforcement systems. Proceed as follows: • Drilling the holes respecting diameter and length required; • Cut the fabric, taking into account the wall thickness (the hole should have at least 2/3 of the masonry length, if the connection is not a through-hole) and the portion of fabric that will have to remain outside the hole (at least 10 cm); • Roll up the fabric longitudinally on itself; • Insert the fabric in the hole and inject using Kimitech resins or mortars from Betonfix or Limepor ranges.