Kimitech EP-IS
Two-component, medium viscosity liquid epoxy resin
Kimitech EP-IS is a two-component, medium viscosity, solvent-free liquid epoxy resin. It does not shrink during hardening that starts once mixed the two components. It has an excellent mechanical strength, its suitable for alkaline environments and permanently in contact with water, it penetrates into cracks and macrofessure (around 1 mm thickncess and bigger than 1 mm).
Applications
Injection on cracked structures to restore the perfect structural monolithicity. • Vertical and oblique anchorings with high resistance to extraction.
Certifications
Kimitech EP-IS is CE marked as steel rods anchoring product acording to the EN 1504-6.
Application
The surfaces must be perfectly dry, cured, free from inconsistent parts and dust, grease, paints and release agents in general. Pour the component ''B’' (hardener) into component ''A'' (resin) and mix with a low speed drill (200-300 per minute) until you get a perfect mixture, taking care not to incorporate air during mixing. In the case of fractional mixing, respect the proportions by weight (and not by volume) indicated on the packages. For injection work, use the proper MM/TL gun or low pressure pump. In the case of anchorings or fillings on mixed masonry structures, where considerable dispersions may occur, the product can be loaded with Kimifill in order to make it less fluid.
Related Products
A range of products to use together with {name}. The use of one or more products varies depending on the type of work to be done.
Kimitech CMP
Medium viscosity epoxy resin used for impregnation of FRP systems
Kimitech EP-IN
Liquid two-component epoxy adhesive for structural injection, vertical downwards, etc.
Kimitech EP-IN/50
Fluid epoxy resin used for impregnation of FRP systems
Kimitech EP-TX
Thixotropic two-component epoxy resin
Kimitech EP-TX/311
Two-component loaded thixotropic epoxy resin for plates, metal elements or of FRP systems bonding
Request Sent
You will receive a confirmation email shortly
