Betonfix AQM GG
Bicomponent cementicious mortar to be used with Kimitech meshes for concrete skimming coats
Betonfix AQM GG is a bi-component fiber-reinforced mortar with high pozzolanic action and high ductility. It is based on pozzolanic and solphate-resistant cement hydraulic binders, selected aggregates with a maximum granulometry of 1 mm, chemical additives and polymers in water dispersion which give excellent characteristics of impermeability and adhesion to the support.
Applications
Betonfix AQM GG cementitious mortar is used in combination with Kimitech mesh for the reinforcement of infill and partition walls to the r.c structure. and to prevent the collapse of floors .
Certifications
Betonfix AQM GG is CE marked as an R2 mortar according to EN 1504-3 and as a masonry mortar according to 998-2.
Application
Betonfix AQM GG shall be applied on clean and consistent surfaces, free of grease or any other substance that may affect the adhesion to the substrate. The support, before the application, has to be wet until SSD conditions. Pour the liquid component (5,5 kg) in a clean container and add gradually the powder (25 kg) with a low-speed stirer (200-300 rpm) until you get a perfect mixture. In case of partial mixtures respect the weight ratios between the components. AQM Betonfix GG can be applied by spatula, trowel or spray machine. Reinforcements with fabrics from Kimitech range may be applied after the adequate curing time of the regularization layer (18-24 hours). For small surfaces it is possible to arm the Betonfix AQM GG itself with the same Kimitech fabrics without waiting the curing time above-mentioned. In the case of thick layers of plaster we recommend performing a preliminary rough coat by adding to mortar Kimitech EP-RG in the amount of 10% by weight of the binder, in order to create a bridge of bonding of the underlying substrate.
Application Areas
Gli interventi dove Betonfix AQM GG può essere utilizzato.
Request Sent
You will receive a confirmation email shortly
