Betonfix 200

Betonfix 200 is CE marked as anchoring of reinforcement steel in compliance with the EN 1504-6, the product is also compliant to the UNI 8147 standard.

Betonfix 200 is ready-to-use on the addition of drinking water. It is used to produce high-quality concrete, Betonfix 200 must be mixed with washed aggregates materials in the appropriate granulometric curve for a dosage of 400-500 kg/m³ and mixed with drinking water to obtain the required consistency (maintaining the water/Betonfix 200 ratio below 0.5). The substrate must be clean and solid. Soak the area to be treated eliminating any pools of water when casting. Mix the product for about 5 minutes with a cement-mixer or, for small quantities, with a mechanical stirring device and an agitator. Add 3/4 of the water required, then add the product and the remaining water continuously until you obtain the consistency required. Once a smooth and free of any lumps mixture is ready, pour or inject it with the usual equipment. Do not run castings with temperatures lower than 2°C.