Betonfix HCR EVO
High performance and high ductility pourable cementitious grout with fibres
Betonfix HCR EVO is a two-component system for non-shrink cementitious grouts, with corrosion inhibitors, fibers reinforced, pourable consistency, with very high mechanical strength at short and long curing, high ductility, high resistance to sulphates. It is suitable for the consolidation of slabs and for the restoration and reinforcement of structural elements in concrete and for infrastructural works
Applications
Betonfix HCR EVO system is used to carry out the restoration and consolidation, in small thicknesses, of horizontal structural elements, such as slabs (structural reinforcement with low thickness collaborative extradossal casting for slabs in reinforced concrete, bricks cement, wood and mixed slabs steel bricks-and-beams) and for the restoration and reinforcement of concrete beams and pillars.
Certifications
The Betonfix HCR EVO system is CE marked as R4 mortar according to EN 1504-3 ("Structural and non-structural repair").
Application
The system is ready to use with the simple addition of drinking water. The mixing of the products can be carried out in a simple concrete mixer or preferably with a mechanical mixing unit. Add half of part A (powder) and start mixing adding half the amount of water shown in the table. Mix until a homogeneous and fluid mixture is obtained, then add the remaining part of the powder gradually adding the remaining part of water until the desired mixing ratio is obtained. Mix further for at least another 5 minutes. Weigh the quantity of fibers required in relation to the volume of the jet to be made and add them gradually (over a period of about 3 minutes), using special fiber routing equipment. Add all the fibers, mix for at least 2-3 minutes. The product can be mixed with aggregates and must be characterized from time to time depending on the percentage and type of aggregates added. The substrate must be previously treated by mechanical scarification suitable to guarantee a rough surface, and free of flaking parts, clean and free from dust, grease, oil and release agents in general.
Application Areas
Gli interventi dove Betonfix HCR EVO può essere utilizzato.
Related Products
A range of products to use together with {name}. The use of one or more products varies depending on the type of work to be done.
Betonfix CR
Pourable cement mortar for structural repair and consolidation works
Betonfix HCR EVO TX
High performance, high ductility thixotropic cementitious grout with fibres
Betonfix 200
Fluid slurry for anchoring, injections with aggregates. Suitable for high resistance concrete.
Request Sent
You will receive a confirmation email shortly
