Limepor SK
Natural hydraulic lime based mortar for plasters
Limepor SK is a white finishing stucco is composed of natural hydraulic lime and fine granulometry of aggregates (< 0.1 mm). Natural hydraulic lime creates a product with mechnical and chemical properties that are far higher than any other dry powder hydrated lime or slaked lime finishing product.
Applications
Skimming coat for traditional plasters and/or renders; Finishing coat for plasters and/or renders made with Limepor or Tectoria mortars; Skimming coat for dehumidifying plasters/renders made with Limepor or Tectoria systems.
Certifications
Limepor SK is CE marked as GP CS II mortar in compliance with the EN 998-1.
Application
Limepor SK must be mixed with drinking water (see the table). We recommend to put 3/4 of the water required in the mixer then gradually add the remaining amount until you get right consistency. Mix carefully until you get a smooth mixture. No other binders must ever be added to the mixture during preparation and laying. Apply with normal manual or mechanical tools. Do not remix by adding water to the product when it has already started to set. Limepor SK must be applied to dry, cured surfaces that are level, compact, clean and dust-free, with no loose parts or traces of paint, grease or any other material that may impair the quality of the bond. Wet the substrate well then spread two coats of the product using a metal spreader, waiting until the first one has started to set, but is still wet, before applying the second. Do not apply the product in layers that are more than 1 mm thick.
Request Sent
You will receive a confirmation email shortly
