Kimitech K40 NF

Kimitech K40 NF è marcato CE come rivestimento protettivo secondo la 1504-2 (principi di intervento MC e IR).

Kimitech K40 NF is supplied in two pre-dosed containers (A + B), of which the "B" part is oversized to allow an easy mixing. To prepare the material, pour component "A" into component "B", mix thoroughly with a low-speed drill (200- 300 per minute) until you get a perfect mixture; the mixture must be diluted with about 15-20% of clean water. Mix a quantity of product not exceeding that which can be applied within the frost time. In case of fractionated mixing, respect the ratios by weight (not by volume) indicated in the packages. In case of protective painting of concrete works, sand the surface in order to make it compact and free from oils, greases, old paints, release agents and any other material that could affect the good anchoring of the further resin coating; apply a coat of primer Kimicover FIX; Kimitech K40 NF must be applied in min. two coats by brush, roller or sprayed with an airless pump. . In case of continuous non-toxic coatings of walls in industries, the substrate must be compact, free from oils, greases, old varnishes and any other material that may affect the good anchoring of the resin coating. Any leveling must be carried out with Betonfix RS or Betonfix R30, rounding the corners between wall-floor and wall-wall. If you intend to make a colored paint, it is feasible to get a non-slip surface by freshly dusting the surface of the first coat of the transparent polyurethane finish, applied with Kimifill 01-03 and vacuuming the encapsulated quartz the next day before finishing the work with the last coat of protective polyurethane. In case of applications in more than one coat, if there is a time exceeding 24 hours between one coat and the next, it is necessary to sand and carefully aspirate the substrate before reapplying the product.