Betonfix R52
Cement-based mortar for skimming coats on concrete and masonry supports, plasters. Maximum granulometry 0,7 mm.
Betonfix R52 is a ready-to-use single-component mortar consisting of hydraulic binders, selected inert materials with a maximum granulometry of 0.7 mm and additives to provide the ideal water repellence and adhesion to the substrate. Betonfix R52 has excellent freeze-thaw resistance. The product is CE marked according to the EN 998-1 as GP mortar and according to EN 1504-3 as R1 mortar.
Applications
Skimming coats of interiors and exteriors; for levelling of gravel clumps and porosity of new, restored or older concrete structures (after blasting to ensure that surfaces are clean, consistent, free of paint, form-release agent residues and substances which may affect the adhesion of leveling).
Certifications
Betonfix R52 presenta marchio CE secondo la EN 998-1 come malta GP e secondo la 1504-3 come R1.
Application
Betonfix R52 must be applied on clean, solid surfaces, free of paint or any other substance which might affect adhesion to the substrate. Ensure that any form-release agent trace has been completely removed before applying the product (hydrosanding is recommended). Betonfix R52 is ready-to-use on the addition of potable water per each pack, according to the consumption indicated in the present TDS. Mix carefully with a low-spped mechanical stirrer (200-300 rev/min) until a smooth mixture forms. The substrate must be wet presenting SSD conditions, and when laying there should be no exceeding water. Betonfix R52 must be applied with a trowel. The final coat may be smoothed with a sponge float or metal spreader for a very smooth finish. Do not apply when it is about to rain, in direct sunlight or in strong winds. For levelling of damaged facades, contact our Technical Support Service for assistance. It is important not to remix the product when it has already started to set: it will lose all its chemical-physical properties. Do not use Betonfix R52 for continuous coatings such as plasterwork.
Application Areas
Gli interventi dove Betonfix R52 può essere utilizzato.
Restoration of reinforced concrete elements even in high thicknesses with thixotropic mortars
Restoration of reinforced concrete elements even in high thicknesses with pourable mortars
Reinforcement of reinforced concrete elements by casing with mortars and concretes
Related Products
A range of products to use together with {name}. The use of one or more products varies depending on the type of work to be done.
Betonfix RS
Cement mortar for finishing of concrete substrates, masonry, plasters. Maximum granulometry 0,5 mm.
Betonfix R30
Cement mortar for concrete substrates, masonry and plasters finishing. Maximum granulometry 0,5 mm.
Betonfix TERMORASA
Cement-based mortar for bonding and skimming coating of certified thermal coats Kimitherm.
Betonfix R52
Cement-based mortar for skimming coats on concrete and masonry supports, plasters. Maximum...
Request Sent
You will receive a confirmation email shortly
