Tectoria M15

Tectoria M15 is CE marked according to the requirements of EN 998-2 for masonry mortars class M15 and according to EN 998-1 as a mortar for interior and exterior GP CS IV. It complies with the requirements of CE marking as a type R restoration mortar according to EN 998-1.

Tectoria M15 must be mixed with drinking water (see the table). It is advisable to introduce into the mixer 3 / 4 of water needed, and continuously add the product and the remaining water until the desired consistency is obtained. Mix thoroughly until you get a perfect amalgam. Apply with normal manual or mechanical equipment. In case of mix with plastering machine (standard type), load it with Tectoria M15 and regulate the flowmeter to a 5-6 l/min of flow rate, depending on the type of the machine used, until you get the consistency needed. The setting values referring to mechanised application are the following: • machine type model PFT G4-G5 and similar, • pump unit D8, • tube parameters: ◦ diameter d=30mm, ◦ length L=15mm. Apply Tectoria M15 from a distance of 20 cm, down from up of the masonry, uniformly. In order to abotain a dehumidifying effect, apply at least a thickness of 2 cm of Tectoria M15. For plaster with thicknesses upper to a 30 mm, the application must be made through coats on the first one which is not troweled. Tectoria M15 must be laid on clean surfaces, free of dust, flaking parts, varnishes, oil or any other material which could affect a good anchoring.