Betonfix RS
Cement mortar for finishing of concrete substrates, masonry, plasters. Maximum granulometry 0,5 mm.
Betonfix RS is a ready-to-use skimming mortar, containing hydraulic binders, selected aggregates with maximum 0.5 mm granulometry and chemical additives, making it highly waterproof and adhesive to the substrate. The product can be applied in thin coat (max. total thickness up to 5 mm). It is CE marked as non structural mortar R2 in compliance with the UNI 1504-3.
Applications
Internal and external plastering, skimming of gravel clumps and porosity of new and old concrete structures (through sanding in order to grant surfaces to be cleaned, washed, without varnishes...)
Certifications
Betonfix RS è marcato CE come malta non strutturale R2 sulla base della UNI EN 1504-3 ed è conforme ai requisiti per rasanti e collanti per sistemi di isolamento a cappotto.
Application
Betonfix RS must be applied on clean, sound surfaces, free of grease or any other substance which might affect adhe-sion to the substrate. Betonfix RS is ready-to-use on the addition of potabel water according to the consumption indi-cated in the above table; mix carefully with a low-speed stir-rer (200-300 rpm) until a smooth mixture is obtained. When used to finish porous substrates (concrete, plaster-work, etc.), prepare the substrate by soaking, avoiding any pools of water: these can be removed by compressed air or liquid vacuum pump. Ensure that all detached parts have been completely removed before applying Betonfix RS on RC structures (water sanding is recommended). Betonfix RS must be applied with a spreader with a maximum 2 mm thickness for each coat, keeping the surface rough if any fur-ther layer of Betonfix RS is envisaged. The fi nal coat may be smoothed with a sponge float or metal spreader for a very smooth finish. Do not apply when it is about to rain, in direct sunlight or in strong winds. Betonfix RS is ideal for the levelling of even old plastic coatings, as long as they are well-anchored and non-brittle. For skim coating of damaged facades, contact our Technical Dpt for assistance.
Application Areas
Gli interventi dove Betonfix RS può essere utilizzato.
Restoration of reinforced concrete elements even in high thicknesses with thixotropic mortars
Restoration of reinforced concrete elements even in high thicknesses with pourable mortars
Reinforcement of reinforced concrete elements by casing with mortars and concretes
Reinforcement of reinforced concrete elements by means of jacketing with fibre-reinforced concrete
Related Products
A range of products to use together with {name}. The use of one or more products varies depending on the type of work to be done.
Betonfix R30
Cement mortar for concrete substrates, masonry and plasters finishing. Maximum granulometry 0,5 mm.
Betonfix TERMORASA
Cement-based mortar for bonding and skimming coating of certified thermal coats Kimitherm.
Betonfix R52
Cement-based mortar for skimming coats on concrete and masonry supports, plasters. Maximum...
Request Sent
You will receive a confirmation email shortly
