Kimitech EP-TX/311

Kimitech EP-TX/311 è marcato CE come incollaggio strutturale secondo la EN 1504-4 e come ancoraggio dell'armatura di acciaio secondo la EN 1504-6.

For specific kind of works read the technical specifications and the technical data sheets of the materials to be used. The product is supplied in pre-dosed packages with a 1/1 resin/hardener ratio to easily prepare small doses on site avoiding mixing errors (the two products have a different coloring). Mix part A (resin) with part B (hardener) until you get an even color and apply with a spatula on perfectly clean, dry, dust-free surfaces and inconsistent parts. Mix the quantity of resin you expect to use within the frost time. STRUCTURAL REINFORCEMENT WITH COMPOSITE SYSTEMS Prepare the surfaces to be reinforced (the concrete supports must have a failure strength on direct traction greater than 1.5 N/mmq) and apply Kimicover FIX primer. Carefully mix the two components of Kimitech EP-TX/311 and apply in uniform layers with an iron spatula; when dry, lay the mesh and, with a suitable metal roller, press it in order to favour adhesion and avoid the formation of dangerous air bubbles. When dry, impregnate the mesh with Kimitech EP-IN fluid resin. If you wish to make further reinforcement coats, contact our Technical Department.