Certifications

Resins and fabrics for FRP reinforcement system certified with CVT

Kimicover FIX

Bicomponent epoxy water-based resin

Kimicover FIX is a two-component epoxy resin for the consolidation of porous and friable substrates in concrete, lime, gypsum, fired and to make surfaces compact, dustproof, ideal for a good anchoring of coatings. It is water based, odorless, solvents free, it is ideal to use in closed rooms, poorly ventilated or with processing of food products. Kimicover FIX is supplied in two pre-dosed containers (A, resin + B, hardener).

Applications

It is used in the reclamation cycle of asbestos-cement structures to prepare the surface to the finishing treatment with Kimicover BLINDO and for the superficial consolidation of substrates in concrete, stone, chalk and terracotta as a preliminar step to the application of Betonfix mortars and Kimicover or Kimitech resins.

Certifications

It is CE marked as a protective coating according to the 1504-2 for the principles of intervention MC and IR. The product is part of the Kimia systems which got the Italian Certificate of Technical Eligibility (CIT) n.392

Application

Pour component 'B' (hardener) into component 'A' (resin), mix well with a low spill drill (200-300 rounds per minute) until a perfect mixture is obtained. Plasters and concrete to be treated must be previously cleaned through sanded down and rinsed with water to remove all kinds of paint, grease, moss or lichen that could hinder the perfect adhesion of the product. Concrete floorings to be finished with epoxy or cement-based mortars will have to be treated mechanically through milling or blushhammering according to the specific need, cleaned with specific cleaners and high pressure, the exceeding water will have to be removed with specific cleaners too. Kimicover FIX must be applied by brush, roller or spray. During application, consider that the following covering will have to be carried out within the following 6-36 hours.

Technical Sheet DOP

Additional Documentation

Where to Use Kimicover FIX

Application Areas

Gli interventi dove Kimicover FIX può essere utilizzato.

Kimicover FIX

Applications

Certifications

Application

Application Areas

Reinforcement of RC beams in bending and shear with FRP fabrics

Reinforcement of RC beams in bending and shear with FRP sheets

Reinforcement of RC columns in bending and shear with FRP

Confinement of RC nodes with FRP

Reinforcement of reinforced concrete panels and walls in bending and shear with FRP

Strengthening of masonry columns and panels in bending and shear with FRP

Intradosal or extradosal reinforcement of arches with FRP

Intradosal or extradosal reinforcement of vaults and domes with FRP

Intradosal reinforcement of floors with FRP

Enclosure of the masonry box with FRP

Strengthening of wooden elements in bending and shear with FRP

Extradosal reinforcement of camorcanna vaults with FRP

Construction of vapor barriers

Construction of multilayer resin flooring

Construction of armoured resin floors

Protective coatings for industrial floors

Asbestos cement encapsulation of “type A”, visible on the outside, and “type B”, visible on the inside

Encapsulation of “type C” asbestos cement, for confinement interventions

Extradosal reinforcement of vaults with structural cocciopesto cap

Protective and anti-slip coating of reinforced concrete elements

Painting of surfaces in contact with drinking water or food

Synthetic paint for sports facility flooring

Related Products

Kimitech EP-TX

Kimitech CMP

Kimitech CB 320

Kimitech CB 420

Kimitech CB 620

Kimitech CB 820

Kimitech CB ST 300

Kimitech CB 380 MTX

Kimitech CBA 320

Kimitech CBA 420

Kimitech CBA 620

Kimitech VR 300

Kimitech PLATE

Kimitech PLATE HM

Request Documentation

Request Sent