Kimia S.p.A. propone malte cementizie e resine idonee alla realizzazione di molteplici tipologie di ancoraggi, placcaggi strutturali, inghisaggi di precisione. Specifiche soluzioni per interventi in fondazione e per la stabilizzazione di terreni e fronti di scavo completano la gamma di soluzioni proposte.
Description
Kimitech VINYL CTR is a fast-curing high performance vinylester resin for anchoring in compact materials. It is injectable in dry, moist or immersed in water. It is suitable for concrete, stone, brick and wood supports in a wide range of applications: fixing of doors, balustrades, roller blinds, antennas, consoles, drawers, machinery, protective barriers, steel structures. It is certified according to EN 1504-6 for structural grouting of reinforcing bars and is certified according to the requirements of ETAG001 part 5 for the use of resin with threaded bars on cracked and non-cracked concrete and for the use of the resin with improved adhesion bars for diameters of 8 mm up to 16 mm on concrete.
Description
Kimitech EP-IS is a two-component, medium viscosity, solvent-free liquid epoxy resin. It does not shrink during hardening that starts once mixed the two components. Kimitech EP-IS has an excellent mechanical strength, it is suitable for alkaline environments and permanently in contact with water, it penetrates into cracks and macrofessure (around 1 mm thickncess and bigger than 1 mm). It has excellent dielectric properties, it protects the reinforcement rods from stray currents. It gaurantees a very good bonding to concrete and masonry supports. The product is supplied in two pre-dosed containers (A + B), part '' A '' is oversized to allow an easy mixing procedure.
Description
Kimisteel FIOCCO GLV is made out of galvanized steel micro-strands with high tensile resistance, rolled up and wrapped in a tissue sleeve. The product is used in both residential and monumental buildings to create mechanical anchoring systems. Kimisteel FIOCCO GLV can be used as independent anchoring system or in combination with reinforcing systems involving Kimitech meshes or steel fabric from Kimisteel range.
Resources
Description
Betonfix 200 TH is a high resistance anti-shrinkage hydraulic slurry with high mechanical resistance for both short and long curing. Betonfix 200 TH does not contain chlorides, ferrous particles or corrosive agents which could cause damage to the reinforcements and the metal equipment. CE marked as anchoring of reinforcement steel in compliance with the EN 1504-6.
The Church of San Domenico in L'Aquila was built in 1309 in behalf of Carlo II d'Angiò. It was damaged and consolidated several times in the last centuries own to heavy earthquakes which hit the area. The earthquake in 2009 caused crackes and collapses, especially:
Villa Manzoni is situated in Dogana locality, at the entrance of the San Marino Republic. It represents one of the rare examples of nineteenth-century manor house in that agricultural area. It was built between '1800 and '1900, although the original settlement is dated back to seventeenth century. Villa Manzoni was the summer country residence of the Manzoni-Borghesi Counts, noble family of the village.
Description
Kimitech EP-IN is a two-component, low viscosity, liquid, epoxy resin that creates structural adhesion with concrete, steel, wood, and stone materials. Extremely high wetting power, Kimitech EP-IN is ideal for impregnating high grammage fabrics and tapes and easily penetrates cracks and micro-fractures (up to 0.3 mm thick). CE marked accordng to EN 1504-4.
Description
Kimitech EP-IN/50 is a two-component, low viscosity, liquid, epoxy resin that creates structural adhesion with concrete, steel, wood, and stone materials. Of extremely high wetting power, Kimitech EP-IN is ideal for impregnating high grammage fabrics and tapes and easily penetrates cracks and micro-fractures (up to 0.3 mm thick). It has excellent dielectric properties, thereby protecting reinforcement from stray currents. The product comes in two ready-dosed containers (A+B): a larger quantity of part “A” is provided to facilitate mixing.
Description
Kimitech EP-TX is a two-component, solvent-free thixotropic, epoxy resin adhesive. Kimitech EP-TX ensures strong adhesion to a variety of substrates and does not shrink on hardening, which occurs as a result of a chemical reaction in which no volatile substances are released. CE marked according to EN 1504-4.
Description
Kimitech F3 is a two-component, thixotropic, polyester resin-based chemical anchoring agent; it ensures rapid setting and strong hold on all building materials. Kimitech F3 is paintable.