Kimicover JOINT e JOINT P
Self-adhesive elastic membrane, width 8 cm for preliminary treatment of expansion joints and recovery joints Self-adhesive elastic membrane in 40x40 cm panels for preliminary treatment of the drains
Kimicover JOINT and Kimicover JOINT P consist of a cold self-adhesive membrane, coupled on top with a 70 g/ m² elastic polypropylene reinforcement. The adhesive side of the membrane is protected by an easy-to-remove silicone paper.
Applications
Kimicover JOINT is applied in correspondence of expansion joints and recovery joints in all waterproofing works. Kimicover JOINT P is used as a connector in water collection wells, in shower tray drains, in pluvial descendants. Lay the membranes, overlap on them the highly elastic Kimitech 120 polypropylene mesh and saturate it with the chosen product for waterproofing (resin, osmotic or elastic cement mortar).
Application
The surfaces involved in the installation of the product must be dry, compact and free from any residual paint, dirt, disarming, moss and lichens, dust and friable materials in general that would prevent perfect adhesion to the support. Remove the silicone paper and apply the self-adhesive membrane. Kimicover JOINT must be applied on the joint covering it for its entire width. In the case of joints with a width greater than 5 mm, before applying Kimicover JOINT, carry out the sealing by placing the Ethafoam closed cell polyethylene support of suitable thickness and applying Tecnoseal 130 singlecomponent polyurethane sealant. Kimicover JOINT P must be applied in correspondence of the wells, drains, descendants, turning up the membrane inside them. Once the Kimicover JOINT and Kimicover JOINT P selfadhesive membranes have been applied, overlap, for a width of about 30 cm Kimitech 120 high-elasticity polypropylene reinforcement mesh and saturate it with a brush with the chosen product for the subsequent waterproofing.