Kimicover FIX
Bicomponent epoxy water-based resin
Kimicover FIX is a two-component epoxy resin for the consolidation of porous and friable substrates in concrete, lime, gypsum, fired and to make surfaces compact, dustproof, ideal for a good anchoring of coatings. It is water based, odorless, solvents free, it is ideal to use in closed rooms, poorly ventilated or with processing of food products. Kimicover FIX is supplied in two pre-dosed containers (A, resin + B, hardener).
Applications
It is used in the reclamation cycle of asbestos-cement structures to prepare the surface to the finishing treatment with Kimicover BLINDO and for the superficial consolidation of substrates in concrete, stone, chalk and terracotta as a preliminar step to the application of Betonfix mortars and Kimicover or Kimitech resins.
Certifications
It is CE marked as a protective coating according to the 1504-2 for the principles of intervention MC and IR. The product is part of the Kimia systems which got the Italian Certificate of Technical Eligibility (CIT) n.392
Application
Pour component 'B' (hardener) into component 'A' (resin), mix well with a low spill drill (200-300 rounds per minute) until a perfect mixture is obtained. Plasters and concrete to be treated must be previously cleaned through sanded down and rinsed with water to remove all kinds of paint, grease, moss or lichen that could hinder the perfect adhesion of the product. Concrete floorings to be finished with epoxy or cement-based mortars will have to be treated mechanically through milling or blushhammering according to the specific need, cleaned with specific cleaners and high pressure, the exceeding water will have to be removed with specific cleaners too. Kimicover FIX must be applied by brush, roller or spray. During application, consider that the following covering will have to be carried out within the following 6-36 hours.
Application Areas
Gli interventi dove Kimicover FIX può essere utilizzato.
Reinforcement of RC beams in bending and shear with FRP fabrics
Reinforcement of RC beams in bending and shear with FRP sheets
Reinforcement of RC columns in bending and shear with FRP
Confinement of RC nodes with FRP
Reinforcement of reinforced concrete panels and walls in bending and shear with FRP
Strengthening of masonry columns and panels in bending and shear with FRP
Intradosal or extradosal reinforcement of arches with FRP
Intradosal or extradosal reinforcement of vaults and domes with FRP
Intradosal reinforcement of floors with FRP
Enclosure of the masonry box with FRP
Strengthening of wooden elements in bending and shear with FRP
Extradosal reinforcement of camorcanna vaults with FRP
Construction of vapor barriers
Construction of multilayer resin flooring
Construction of armoured resin floors
Protective coatings for industrial floors
Asbestos cement encapsulation of “type A”, visible on the outside, and “type B”, visible on the inside
Encapsulation of “type C” asbestos cement, for confinement interventions
Extradosal reinforcement of vaults with structural cocciopesto cap
Related Products
A range of products to use together with {name}. The use of one or more products varies depending on the type of work to be done.
Kimitech EP-TX
Thixotropic two-component epoxy resin
Kimitech CMP
Medium viscosity epoxy resin used for impregnation of FRP systems
Kimitech CB 320
Range of carbon fibre reinforcement fabrics with different weights and textures for structural...
Kimitech CB 420
Range of carbon fibre reinforcement fabrics with different weights and textures for structural...
Kimitech CB 620
Range of carbon fibre reinforcement fabrics with different weights and textures for structural...
Kimitech CB 820
Range of carbon fibre reinforcement fabrics with different weights and textures for structural...
Kimitech CB ST 300
Range of carbon fibre reinforcement fabrics with different weights and textures for structural...
Kimitech CB 380 MTX
Tessuti di armatura in fibra di carbonio per rinforzi FRP
Kimitech CBA 320
"Range of carbon fibre reinforcement fabrics with different weights and textures for structural...
Kimitech CBA 420
"Range of carbon fibre reinforcement fabrics with different weights and textures for structural...
Kimitech CBA 620
"Range of carbon fibre reinforcement fabrics with different weights and textures for structural...
Kimitech VR 300
Tessuti in fibra di vetro specifici per interventi strutturali
Kimitech PLATE
Pultruded carbon fibre plate for FRP interventions
Kimitech PLATE HM
Lamina pultrusa in fibra di carbonio ad alto modulo per realizzare interventi FRP
Request Sent
You will receive a confirmation email shortly
